FREE 3D WORLD

1 Spraying basics

Spraying through the spray gun or disc atomizer, with the help of pressure or centrifugal force, dispersed into uniform and fine droplets, applied to the surface of the coating method. It can be divided into air spraying, airless spraying, electrostatic spraying, and various derived methods of the above basic spraying forms.

2 Composition and layout of spraying production line

Figure 1 Spraying automation unit

3 Detailed description of spraying supporting equipment

3.1 Spraying robots

The spraying process requires explosion-proof, so an explosion-proof robot dedicated to spraying must be selected.

Figure 2 Spraying robot

3.2 Paint booths

The paint spray room is mainly composed of spray room, air supply system, activated carbon waste treatment system and surrounding supporting equipment.

Figure 3 Schematic diagram of the spray booth

3.3 Paint supply systems

Manual painting and automatic paint supply are adopted.

Figure 4 Schematic diagram of the paint supply system

3.4 Automatic spray guns

The automatic spray gun is installed at the end of the robot, and the robot performs specific spraying actions.

Figure 5 Automatic spray gun